Contact Person : Mr. Parth J Panchal
Ref. No. : 1042594
Status : seller
Products : Jiggers
Posting Type : Regular Offer
Posting Date : September 20, 2010
Friday, 4 February 2011
Almost three-fold increase in Rieter Textile Systems orders
The recovery in the textile machinery and automotive markets that had started in the second half of 2009 continued in 2010. Despite the usual seasonal effects at Automotive Systems in the second six months, demand over the course of the year as a whole was at a considerably higher level than in the previous year.Orders received by the Rieter Group in the 2010 financial year totaled 3’170.0 million CHF. Compared to the previous year’s figure, this corresponded to an increase of 64% (1’935.1 million CHFin 2009). The trend in order intake was dynamic throughout the year. The steep rise compared with the previous year was due primarily to very strong demand at Textile Systems.The 32% increase in sales by the Rieter Group was less than the growth in orders received due to the low order volume in the previous year. Sales were slightly higher in the second half of the year than in the first six months and totaled 2’585.8 million CHF (1’956.3 million CHF in 2009). Exchange rate trends adversely affected both key figures, especially in the second half. In local currency terms, orders received and sales increased by 68% and 36%, respectively, in the year under review. Based on exchange rates prevailing in 2007, consolidated sales would currently already be 2.9 billion CHF again.
Rieter Textile Systems:
almost three-fold increase in orders received
The world market for spinning machinery and components recorded a strong recovery with a broad regional base in the year under review, following two years of conspicuously weak demand. The main markets for Rieter were China, India and Turkey. There was also a large volume of demand from Bangladesh, Brazil, Indonesia, Pakistan, South Korea, and also the USA. The upswing was driven by investment demand for replacements and expansion as well as strong growth in textile consumption in the major Asian markets. Rieter Textile Systems successfully exploited the positive trend due to its strong market position, increasingly also in machinery and technology components which are adapted to local needs in emerging markets.
Read more on Almost three-fold increase in Rieter Textile Systems orders @ Fibre2fashion.com
Thursday, 3 February 2011
Wanjie Group places order for PSF spinning plant
Wanjie Group Co. Ltd. based in China has ordered for a complete polyester staple fibre (PSF) spinning plant from Oerlikon Neumag based in Germany. The Germany-based company will extend engineering services apart from the machinery.The plant is likely to be installed in the Shandong Province towards the end of this year and the manufacturing is likely to start by the middle of 2012. As per Oerlikon Neumag, Wanjie Group has the highest market share of staple fibre production that is meant for textile usage in the Shandong Province. The Chinese market is extremely competitive for the plant manufacturers.
China is one of the most rapidly growing economies of the world and through this order, the Germany-based company is likely to strengthen its hold in the Chinese market. Oerlikon Neumag has a very high export share for synthetic staple fibre plants. With such projects coming from China, the company can learn how to be competitive in the international market from its trading partner.
Read more on Wanjie Group places order for PSF spinning plant @ Fibre2fashion.com
Wednesday, 2 February 2011
Decatising Machine Buying Leads
Contact Person : Mr. Ripudaman Singh
Ref. No. : 11129917
Status : Buyer
Products : Decatising Machine
Posting Type : Regular Offer
Posting Date : January 08, 2011
ATME-I to continue with Techtextil North America in 2012
American Textile Machinery Association (ATMA) and Messe Frankfurt USA have agreed on the inclusion of American Textile Machinery Exhibition–International (ATME-I) with Techtextil North America every even year starting in 2012. The two exhibitions successfully co-located last May in Atlanta.
Techtextil North America
Georgia World Congress Center
Atlanta, Georgia, USA
April 24 – 26, 2012
ATME-I will provide textile machinery, equipment, products and service suppliers a broad textile and apparels industry base to showcase their products and services. American Textile Machinery Association (ATMA) traces its beginning and that of ATME-I to the International Cotton Machinery Exposition in Atlanta in 1881.
The agreement between Messe Frankfurt USA and ATMA follows the launch earlier last year of Texprocess Americas incorporating SPESA EXPO.
David Audrain, President of Messe Frankfurt stated that “We are extremely pleased with ATMA's decision to continue the successful relationship begun last year. Building on the launch of Texprocess Americas we believe that the expansion of Techtextil North America to include ATMA's ATME-I creates the most important co-location of textile industry events in the Americas. Our goal is to give buyers the best value for their time investment, which means providing them with the most comprehensive selection of manufacturers at our respective shows.”
Speaking on behalf of ATME-I, American Textile Machinery Association (ATMA) Chairman and President of Argus Fire Control, Mike Viniconis commented: “After delivering a strong and well-attended ATME-I 2010 this past May, co-located with Techtextil North America and SPESA Expo, ATMA is pleased to again provide in Atlanta a dynamic platform for broadly defined textile industries in 2012.
Techtextil North America
Georgia World Congress Center
Atlanta, Georgia, USA
April 24 – 26, 2012
ATME-I will provide textile machinery, equipment, products and service suppliers a broad textile and apparels industry base to showcase their products and services. American Textile Machinery Association (ATMA) traces its beginning and that of ATME-I to the International Cotton Machinery Exposition in Atlanta in 1881.
The agreement between Messe Frankfurt USA and ATMA follows the launch earlier last year of Texprocess Americas incorporating SPESA EXPO.
David Audrain, President of Messe Frankfurt stated that “We are extremely pleased with ATMA's decision to continue the successful relationship begun last year. Building on the launch of Texprocess Americas we believe that the expansion of Techtextil North America to include ATMA's ATME-I creates the most important co-location of textile industry events in the Americas. Our goal is to give buyers the best value for their time investment, which means providing them with the most comprehensive selection of manufacturers at our respective shows.”
Speaking on behalf of ATME-I, American Textile Machinery Association (ATMA) Chairman and President of Argus Fire Control, Mike Viniconis commented: “After delivering a strong and well-attended ATME-I 2010 this past May, co-located with Techtextil North America and SPESA Expo, ATMA is pleased to again provide in Atlanta a dynamic platform for broadly defined textile industries in 2012.
Laboratory Dyeing Apparatus Buying Leads
Contact Person : Mr. Saquib Fayyaz
Ref. No. : 11129477
Status : Buyer
Products : Laboratory Dyeing Apparatus
Posting Type : Regular Offer
Posting Date : January 06, 2011
Tuesday, 1 February 2011
Finishing Machine Selling Leads
Contact Person : Ms. Navita Oberoi
Ref. No. : 10115635
Status : Seller
Products : Finishing Machine
Posting Type : Regular Offer
Posting Date : November 30, 2010
Subscribe to:
Posts (Atom)